If your Bissell ProHeat 2X Revolution Pet Turbo isn’t providing suction, it can hinder your cleaning efforts. This guide walks you through common causes and practical fixes to restore optimal performance safely and efficiently.
Understanding the typical issues behind suction loss and following these clear steps will help you get your carpet cleaner back to working like new.
Key Takeaways
| Check for blockages | Clogs in the hose or brush roll can reduce suction. |
| Inspect the filters | Dirty filters restrict airflow and decrease suction. |
| Examine the water tank | Low or improperly seated water tanks can affect suction. |
| Verify the brush roll | Obstructions or a worn brush roll can hinder suction. |
| Test the motor | A malfunctioning motor may need servicing or replacement. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Step 1: Turn Off and Unplug the Cleaner
Before inspecting, always turn off and unplug your Bissell cleaner to ensure safety during troubleshooting.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Step 2: Check for Clogs and Blockages
- Remove the hose and wand components carefully.
- Inspect for debris, hair, or blockages inside the hose, nozzle, and brush roll area.
- Clear any obstructions using a long, flexible brush or stick.
- Reassemble and test for suction.
Step 3: Clean or Replace Filters
Dirty filters can significantly reduce suction. Remove the filters according to your model’s manual, wash them with warm water and mild detergent, then let them dry completely before reinserting. Replace filters if they are damaged or excessively dirty.
Step 4: Check Water Tank and Water Flow
- Ensure the water tank is filled properly and seated correctly.
- Remove and inspect the tank for clogs or damage.
- Reinstall securely and run a test cleaning cycle.
Step 5: Inspect and Maintain the Brush Roll
Remove the brush roll to check for tangled hair, fibers, or debris. Clear obstructions and ensure the brush roll spins freely. Replace the brush if it’s worn or damaged.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18 lbs
- ✔ Cable Length: 25 ft
- ✔ Tank Capacity: 1.25 gallons
JORAIR Brush Replacement Compatible
- ✔ Number of brushes: 3
- ✔ Filter type: Multi-surface filters
- ✔ Compatibility: Specific CrossWave models
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers powerful suction, advanced heatwave technology, and dual dirtlifter powerbrushes, making it a top choice for tackling stubborn stains and embedded dirt.
Pros:
- 40% more suction power
- Quiet operation with noise reduction
- Effective deep cleaning modes
- Pet stain and allergen removal
Cons:
- Relatively heavier design
- Requires regular filter maintenance
- Higher price point
Best for: Pet owners and deep cleaning needs
Not ideal for: Light, quick spot cleaning or small areas
Bottom line: A powerful, quiet, and pet-friendly carpet cleaner for deep, professional-grade results.
JORAIR Brush Replacement Compatible
The JORAIR Brush Replacement kit is compatible with Bissell CrossWave models and offers a cost-effective way to restore your device’s cleaning power with quality brushes and filters.
Pros:
- Easy to install
- Includes multiple brush rolls
- Compatible with various CrossWave models
- Affordable replacement option
Cons:
- Limited to CrossWave models
- Not suitable for upright cleaners
Best for: Maintaining your CrossWave’s performance
Not ideal for: Use with non-compatible Bissell models
Bottom line: A reliable, affordable way to keep your CrossWave functioning at its best.
Frequently Asked Questions
Why is my Bissell cleaner losing suction?
Common causes include clogged hoses, dirty filters, low water levels, or obstructed brush rolls. Following the troubleshooting steps can help restore suction.
How often should I clean the filters?
It’s best to clean filters every 1-3 months, or more frequently if you notice a drop in suction or cleaning performance.
Can I use any cleaning solution with my Bissell?
Use only the cleaning solutions recommended for your model, such as the BISSELL Multi-Surface Solution or Deep Clean formulas, to ensure safety and optimal results.
What safety precautions should I take while troubleshooting?
Always unplug the unit before inspection, avoid forcing parts, and follow the manufacturer’s instructions for cleaning and maintenance.
Revive Your Carpet Cleaner’s Power
By following these step-by-step troubleshooting tips, you can identify and fix common issues that cause loss of suction in your Bissell cleaner. Regular maintenance and careful inspection will keep your device performing at its best, ensuring spotless carpets and a healthier home environment.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
