If your Bissell ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner isn’t spraying water or cleaning solution, it can hinder your cleaning efforts. This issue can be caused by clogs, pump problems, or blockages in the hose or nozzle. Fortunately, most causes are fixable with simple steps, ensuring your machine works efficiently again.
Follow this guide to identify common issues and learn how to fix your Bissell carpet cleaner safely and effectively.
Key Takeaways
| Clogged or Blocked Nozzle | Cleaning the spray nozzle can restore water flow. |
| Pump or Hose Blockages | Clear blockages in the pump and hose to enable spraying. |
| Low Water Level or Dirty Filter | Ensure sufficient water and clean filters for proper operation. |
| Malfunctioning Pump or Motor | Diagnose pump or motor issues if cleaning parts are clear. |
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet Cleaner, 35799
TURBOSTRENGTH MOTOR TECHNOLOGY. Delivers an energy-efficient 40% more suction power and 50% noise reduction for a quiet clean.
As an affiliate, we earn on qualifying purchases.
Check the Water and Solution Levels
- Ensure the water tank is filled with clean water and the solution reservoir has enough solution. Low levels can prevent spraying.
- Refill or replace the tanks as needed, making sure they are securely seated.
JORAIR Brush Replacement Compatible with Bissell CrossWave, 3 Multi-Surface Brush Roll 1868 + 3 Vacuum Filter 1866 Vacuum Filter, Compare to Part 1608683, 160-8683, 1608684
【Compatibility】The filter and brush replacement compatible with Bissell CrossWave 1785G,1785B,1785F,2328,2305,2305K,1785,17853,17854,17855,17856,1785Q,1785A,17852,17858,17859,1785P,1785R,1785T,1785V,1785W,2303,2306A,2306,23062,23068,2551,3888A (Please note：this kit is only compatible with Bissell...
As an affiliate, we earn on qualifying purchases.
Inspect and Clear the Spray Nozzle
- Locate the spray nozzle at the front of the cleaner.
- Remove any debris or buildup that may block the spray opening using a small brush or pin.
- Run water through the nozzle to ensure it’s clear.
Examine the Hoses and Connectors
- Unplug the machine and inspect the hose for kinks, cracks, or obstructions.
- Detach the hose if possible and clear any clogs with a long, flexible brush or by flushing with water.
- Reconnect the hose securely.
Check the Pump and Filter
- Locate the pump and ensure it is functioning properly. Listen for unusual noises or lack of sound during operation.
- Remove and clean the filter, if accessible, to ensure unobstructed water flow.
- Replace any damaged filters or parts if necessary.
Test the Machine After Repairs
Reassemble all parts, fill the tanks, and turn on the cleaner. Test the spray function on a small carpet area to confirm water is spraying evenly.
The Products in This Guide
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
- ✔ Weight: 18 lbs
- ✔ Tank Capacity: 1.25 gal
- ✔ Power Cord: 25 ft
JORAIR Brush Replacement Compatible
- ✔ Weight: 0.5 lbs
- ✔ Material: Plastic
- ✔ Package Count: 7 pieces
BISSELL ProHeat 2X Revolution Pet Turbo Upright Carpet C
The BISSELL ProHeat 2X Revolution Pet Turbo offers impressive suction, heatwave technology, and dual DirtLifter PowerBrushes. It’s designed for deep, professional-grade cleaning, especially effective on embedded dirt and pet messes.
Pros:
- 40% more suction power
- Reduced noise levels
- Heatwave technology maintains water temperature
- Max clean mode for tough stains
Cons:
- Heavier than basic models
- Requires regular filter cleaning
- Can be expensive for some budgets
Best for: Deep cleaning pet stains and heavily soiled carpets
Not ideal for: Light touch-up cleaning or small area spot cleaning
Bottom line: A powerful, quiet carpet cleaner ideal for pet owners and deep cleaning needs.
JORAIR Brush Replacement Compatible
This compatible JORAIR replacement kit provides multi-surface brush rolls and filters, ensuring your Bissell CrossWave operates at peak performance. Ideal for maintaining your machine’s cleaning power.
Pros:
- Affordable replacement parts
- Easy to install
- Includes 3 brushes and filters
- Improves cleaning efficiency
Cons:
- Not compatible with all Bissell models
- Requires regular replacement for optimal results
- Limited to CrossWave models
Best for: Maintaining and restoring CrossWave cleaning performance
Not ideal for: For non-compatible Bissell models or handheld cleaners
Bottom line: A cost-effective way to keep your CrossWave performing like new.
Frequently Asked Questions
Why is my Bissell not spraying water?
Possible causes include clogged nozzles, blockages in the hose or pump, low water levels, or dirty filters. Follow the troubleshooting steps to identify and fix the issue.
How do I clean the spray nozzle?
Remove the nozzle and clear any debris or buildup with a small brush or pin. Run water through it to ensure it is not blocked.
What if the pump isn’t working?
Check for blockages in the hose, ensure the filter is clean, and listen for the pump’s sound during operation. If it still doesn’t work, the pump may need replacement.
Can I use different cleaning solutions?
It’s best to use BISSELL Multi-Surface Solution or the recommended deep cleaning formulas to ensure compatibility and optimal results.
Restore Your Carpet Cleaner’s Spraying Power
By following these troubleshooting steps, you can effectively resolve most issues causing your Bissell carpet cleaner not to spray. Regular maintenance, such as cleaning filters and nozzles, can prevent future problems. If problems persist, consider replacing worn parts or consulting professional repair services. A well-maintained machine ensures your carpets stay fresh and clean with ease.
Affiliate disclosure: As an Amazon Associate we earn from qualifying purchases. Prices and availability are accurate as of the time of publishing.
